RKWard on Mac

From RKWard
Revision as of 18:04, 2 April 2016 by Tfry (Talk | contribs)

Jump to: navigation, search

This page has been marked as needing an improvement. This means the page is incomplete, badly structured or otherwise in need of significant improvements.



Although access to a Mac is still limited for the main contributors, as of version 0.6.5, there is a pre-compiled ready-to-install bundle for Mac OS X >= 10.09. We want to encourage you to send feedback to our mailing lists, be it success stories or bug reports, because without it is hard to continue support for this operating system in the future!

Please take the information below as a guide through the required steps. If one of the steps is unclear, or simply does not work, let us know, and we will find a solution.

Installing using the precompiled binary bundle

We've used the MacPort of RKWard to precompile a installation .pkg which includes all needed KDE libraries and RKWard, currently only for Mac OS X Maverick (10.9) or above. Newer releases of this bundle do not inlcude R, which means you need to install the latest version of R from CRAN first (make sure the RKWard bundle you install matches this R version, as is said in the bundle's file name: "needs_CRAN_R-<version>"). The bundle is still work in progress, but it has been tested and is reported to run on various machines. A screencast of the installation is available here.

Note: If installing on OS 10.8 Mountain Lion, you will need to either disable Gatekeeper in the Security & Privacy control panel by setting "Allow applications downloaded from:" to "Anywhere", or by right-clicking the installer and selecting "Open."

If you test this bundle package, please send us feedback, be it a short success notice or a bug report. We rely on this simple feedback for the further development of this port!

Uninstalling the bundle

Follow the instructions on uninstalling the MacPorts source installation (see below).

Installing from source using MacPorts

The MacPorts project offers up-to-date KDE packages for Mac OS X, so at the moment it is considered the preferred method over fink (see earlier revisions of this page). A screencast of the process is available here.

When is this preferable over the binary bundle?

Because the bundling process currently involves a lot of manual steps, we can only release new binary bundles every now and then. If you need or want to check out the latest development version of RKWard, e.g., to test new features or fixes, installing the latest port is the preferred method for Mac users. However, you should not mix both installation types, allthough the bundle should not interfere with MacPorts in general.


  1. Install all requirements for the MacPorts software. Please make sure you have a recent version of XCode installed and take care of keeping it up-to-date, because some ports will not compile otherwise. In case you have more than one installation of XCode on your system, make sure to set one (probably the latest) as the default, because confusion about the gcc compilers available can mess up the build. A symptom for this might be failing builds of certain ports later on. If this is the case, use xcode-select to set the default before installing MacPorts, e.g.:
    xcode-select -switch /Applications/Xcode.app/Contents/Developer
  2. There is an official RKWard port you might use. To do so, simply install MacPorts manually and then jump right to Building RKWard. Alternatively, you can use the build script that is part of RKWard's sources, which is also the method we use to build and bundle RKWard for OS X. It will also take care if the MacPorts installation for you and configure it accordingly. Only do this if you're using MacPorts for RKWard alone! The script installs everything to /opt/rkward, which is not the MacPorts default path! Do not use the script if you're already using MacPorts! To proceed, open a terminal and follow these steps:
    1. Create a new directory for the RKWard sources:
      sudo mkdir -p /opt/git
    2. Checkout the source code and create a symbolic link to the portfile location (it's expected by the script):
      cd /opt/git
      git clone git://anongit.kde.org/rkward.git
      cd /opt
      sudo ln -s /opt/git/rkward/macports/ ports
    3. You can now call the build script to do certain tasks. To get an overview of its features, call it without any options:
      To setup and configure MacPorts in /opt/rkward, use the "-F" option and state the most recent release of MacPorts, for example 2.3.4:
      /opt/git/rkward/macports/update_bundle.sh -F 2.3.4
    4. After the installation finished, you can use the script to install RKWard (see below).

All further needed software packages (KDE and R) will be installed with the RKWard port automatically, so you should need no additional preparations.

Building RKWard

This step should take only one command in a terminal, but a lot of time to finish (depending on your CPU, it could even take days!). With the steps described above you have prepared MacPorts to build the package.

If you want to install the latest stable release from a standard MacPorts installation, you should use this command:

sudo port -v install rkward

If, on the other hand, you used the build script to setup MacPorts, you should also continue to use the script to install RKWard. As you have seen, the script has options to decide whether you would like to build against a present installation of R or use MacPorts version of R, install the latest stable release of RKWard or the current development snapshot (meaning: this is the bleeding edge approach!) etc. To install RKWard stable with CRAN R, call the script with these options:

/opt/git/rkward/macports/update_bundle.sh -Dbr

Running RKWard

If the compilation and installation finished successfully, you should now find RKWard in your Applications menu, filed under MacPorts.

Note: Before you can start any KDE software, you first need to run the following commands once (should be done automatically if you installed using the build script):

sudo launchctl load -w /Library/LaunchDaemons/org.freedesktop.dbus-system.plist
launchctl load -w /Library/LaunchAgents/org.freedesktop.dbus-session.plist

Uninstalling RKWard

There is no genuine uninstall routine yet. But to remove it again from your system, all you need to do is to remove two directories:

sudo rm -rf /Applications/RKWard
sudo rm -rf /opt/rkward

Note: Of course, in case you have saved anything manually to these folders since installation, backup your data first -- and be careful with rm -rf!

Alternatively, you can also have this done by the build script to wipe RKWard from your system:

/opt/git/rkward/macports/update_bundle.sh -X

Using the script will also clean up some symlinks that were created for KDE services during installation. Removing RKWard manually will leave these symbolic links. They will do no harm, since you've just removed their targets. However, if you're certain you're not running KDE services anymore, you can also clean those up manually:

sudo rm /Library/LaunchDaemons/org.freedesktop.dbus-system.plist
sudo rm /Library/LaunchDaemons/org.freedesktop.avahi-daemon.plist
sudo rm /Library/LaunchDaemons/org.freedesktop.avahi-dnsconfd.plist
sudo rm /Library/LaunchAgents/org.freedesktop.dbus-session.plist
sudo rm /Library/LaunchAgents/org.macports.kdecache.plist

Note: To be safe here, first check with ls -l /Library/LaunchDaemons and ls -l /Library/LaunchAgents that these links are really dead and associated with files in /opt/rkward!


Again: Some detail or other of the above instructions is probably just wrong. If / when you get an error, please don't give up. Send us a mail, and we will talk you through. BTW: If you figured out the remaining details all by yourself: Great! But please drop us a note as well, so we can provide more accurate instructions in the future.

RKWard crashes on start

Possible solution no. 1: Your KDE setup is probably not ready, most likely dbus is not running. Before you can start any KDE software, you first need to run the following commands once:

sudo launchctl load -w /Library/LaunchDaemons/org.freedesktop.dbus-system.plist
launchctl load -w /Library/LaunchAgents/org.freedesktop.dbus-session.plist

Possible solution no. 2: You had installed R from another source before, RKWard picks the wrong one and doesn't find its own R package(s). If possible, remove the older R installation first.

Language is always english

Possible solution: If the LANG variable is not set in the environment RKWard is started, you will always get the english interface. To change that, e.g. into german, you can also use launchctl, before you start RKWard:

launchctl setenv LANG de_DE.UTF-8

This setting takes effect immediately, but won't survive a reboot. A more permanent solution is to set this environment variable for your user account by creating or adding to the file ~/.MacOSX/environment.plist:

<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
Personal tools